Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs
Intermediate Assembly w/ DTRs

Intermediate Assembly w/ DTRs

Regular price$304.00
/
Shipping calculated at checkout.
  • Worldwide Shipping Available
  • Questions? Contact Us Before Purchasing

This Is A Complete Intermediate Assembly With All Required Hardware & Double Tap Rails - This Single Assembly Is Used To Increase The Overall Length Of Your Rack System By 12" (30.48cm) And Comes With The Necessary Hardware To Bolt Into Your Existing Setup. The Side Supports Included In This Assembly Raise The Double Tap Rail 1" (2.54cm) Above The Lower Rail Giving The Rack Rails An Overall Height Of 2" (5.08cm) Over The Rack Base.

Each Assembly Contains The Following:

  • (2) Intermediates (Driver & Passenger Sides)
  • (2) Intermediate Run Tubes
  • (4) Double Tap Side Supports
  • (2) Hinge Mount Standard Assemblies (W/ Mounting Hardware Selected Above Unless No Mounts Or Hardware Option Selected)
  • (4) Connector Slugs
  • (8) Connector Slug 316 Stainless Hardware Sets 
  • (4) Threaded Slugs
  • (4) Threaded Slug 316 Stainless Hardware Sets
  • (2) Crossbars Of Selected Length

Optional Selections

MOUNTING STYLE

    • Track Mount - These Zinc Coated Track Nuts Are For Use With YAKIMA® or Equivalent Extruded Aluminum Track Systems 
    • Hard Mount (Exp) - This Mounting Style Uses Drilled Holes And Expansion Nuts To Affix The Mount To The Mounting Surface
    • Hard Mount (Riv) - This Mounting Style Uses Drilled Holes And RivNuts To Affix The Mount To The Mounting Surface - RivNuts Require A RivNut Tool To Install Which Can Be Purchased HERE
    • No Hardware - No Mounting Hardware Is Included (Holes Are Designed For M6 or 1/4" Size Hardware) 
    • No Mounts Or Hardware - No Mounts Or Mounting Hardware Is Included

FINISH

    • Textured Black - A Durable Fine Textured Black Powdercoat Finish
    • Raw - Raw Aluminum Finish With No Surface Prep*

WIDTH

    • Choose Overall Rack Width Measurement - These Are Not The Measurement Of The Crossbars Themselves, But Using The Selected Crossbar Sets The Overall Rack Width - Custom Widths Are Available By Contacting Our Sales Team At Info@Zombieracks.com 

*Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation. 

All Domestic Sales Ship UPS Ground From Our Warehouse In Southern California

Should You Need Expedited Shipping, Please Contact Us Directly And A Team Member Can Help Quote Expedited Shipping Services

International Customers Should Contact Us Directly To Arrange Shipping Prior To Ordering, We Typically Ship UPS International Economy

All Return Shipments Must Be Authorized By Zombieracks With A Given RMA Number

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed